A shaped backsplash as the focal point
The decorative backsplash gives this vanity its most recognizable detail. Its raised central section steps down through curved shoulders toward the two ends. That outline creates a softer silhouette against the closely spaced vertical texture of the wall behind it. Three fixture openings sit within the central stone section, above the oval basin cutout.
The photographs show the backsplash from both wider and closer viewpoints. The wider views explain how its profile relates to the length of the vanity. The close views reveal the stone’s subtle tonal variation around the fixture openings and across the top. Together, they show the relationship between the shaped back panel and the simpler horizontal counter.
2 cm stone with a deep mitered apron
The specified material is 2 cm Bianco Superiore Honed quartzite, supplied by Westcoast Granite. The vanity specification calls for a 14½-inch mitered apron. This dimension describes the depth of the vertical front face; the stone itself is 2 cm thick. Keeping those measurements separate explains how a relatively thin slab is fabricated into the substantial form visible in the photographs.
The deep face provides room for the darker natural veining to remain visible below the countertop. At the two ends, the photographs show the junctions between the top, apron and side returns. A single eased edge with a 1/8-inch radius was specified for the stonework. The honed finish gives the surface a soft appearance in the available interior light.
Fabrication and installation scope
VE Stone Ltd.’s scope included measurement, material supply, fabrication, delivery and installation. The stonework covered the vanity top and its decorative backsplash, together with the separately specified closet island countertop. Using the same material across these elements carried the selection beyond the bathroom, although the closet island is not shown in this photo set.
The six installation photographs concentrate on the completed stonework: the overall vanity, the shaped backsplash, the oval cutout and the end details. Temporary timber supports, exposed fixture connections and unfinished surrounding surfaces are visible. They provide a record of this stage of the installation, before the room’s remaining trades and fittings were finished.
Planning a custom bathroom vanity
A shaped backsplash and a deep apron each affect the appearance of a vanity, as do the stone’s natural pattern, edge detail and fixture positions. This project shows those choices together at the installation stage. Explore our bathroom countertops and backsplash options, or request a quote to discuss the material, dimensions and fabrication details for your own project.